Fiber cement siding should be installed 6” or more above the grade level of the house with a 1”– 2” gap between horizontal surfaces like decks, steps, or adjacent roofs. Flash above doors and windows, leaving a ¼” gap between the flashing and siding.
Use a square or level to check that the rows line up at corners. When notching the siding around doors and windows, hold it in place and mark each end. To determine the depth of the notch, hook the spacer stick on the previous row of siding and measure from the top of the stick to the window or door unit.
When cutting angles on gables, start by cutting a piece of scrap siding or wood to the proper angle then use it to mark each piece. To measure the top row of siding on horizontal eaves, hook the spacer stick on the previous row and measure up to the eave, then rip the siding to width.
welcome to contact us kboard@yahoo.cn
www.kboardbm.com
Fiber cement siding is a building material used to cover the exterior of a building in both commercial and domestic applications. Fiber cement is a composite material made of sand, cement and cellulose fibers.There is another Cement Board Provider offers mgo cement board at best prices.
回复删除Source : Buy Cement Board